Dear customer, our laboratory accepts water samples between 8AM and 4PM.

+358 20 741 7229
Reseller service
Mon - Fri 08:00 - 16:00

Email us
Sales

Search by product name or part number

Most popular searches

Watman filter sets

Water quality

For a suitable filter type, we first need to know the origin and quality of the water. Here we use the household water analysis and test filtration conducted by a water laboratory.

The Fe filter series maintains and even improves the freshness of the water, as it relies on oxygen filtration without any chemicals at all.

The filtered water remains cool, and as the water volume is low, there is no need for a water pump that would warm up the water. In addition to iron and manganese, the equipment removes hydrogen sulphide, as well as aggressive carbonic acid and some humus. Other special filters can also remove other contaminants, such as radon or salt.

TYPE, SIZE AND INSTALLATION OF THE UNIT

The difference between solids or mechanical filtration

WatMan Cintropur filters for household use

NW 18

Average flow rate: 3,5 m³/h
Working pressure: 10 bar
Maximum working pressure: 16 bar
Maximum operating temperature: 50 °C
Filter Density: 25 µ

NW 25

Average flow rate: 5,5 m³/h
Working pressure: 10 bar
Maximum working pressure: 16 bar
Maximum operating temperature: 50 °C
Filter Density: 25 µ

NW 32

Average flow rate: 6,5 m³/h
Working pressure: 10 bar
Maximum working pressure: 16 bar
Maximum operating temperature: 50 °C
Filter Density: 25 µ

NW 25 DUO-CTN

Average flow rate: 0,5 m³/h (value when using CINTROPUR SCIN activated carbon filter)
Working pressure: 10 bar
Maximum working pressure: 16 bar
Maximum operating temperature: 50 °C
Filter Density: 25 µ

NW 25 TE-CTN

Average flow rate: 0,5 m³/h (value when using CINTROPUR SCIN activated carbon filter)
Maximum working pressure: 10 bar
Maximum working pressure: 16 bar
Maximum operating temperature: 50 °C

NW 32 TE

Average flow rate: 0,5 m³/h (value when using CINTROPUR SCIN activated carbon filter)
Working pressure: 10 bar
Maximum working pressure: 16 bar
Maximum operating temperature: 50 °C

WatMan Cintropur filters for industrial use

NW 500

Average flow rate: 18 m³/h
Working pressure: 10 bar
Maximum working pressure: 16 bar
Maximum operating temperature: 50 °C
Filter Density: 25 µ

NW 650

Average flow rate: 25 m³/h
Working pressure: 10 bar
Suurin käyttöpaine: 16 bar
Maximum operating temperature: 50 °C
Filter Density: 25 µ

NW 800

Average flow rate: 32 m³/h
Working pressure: 10 bar
Maximum working pressure: 16 bar
Maximum operating temperature: 50 °C
Filter Density: 25 µ

NW 500 TE

Average flow rate: 2 m³/h (value when using CINTROPUR SCIN activated carbon filter)
Working pressure: 10 bar
Maximum working pressure: 16 bar
Maximum operating temperature: 50 °C

Activated carbon 3,4 l

Quality CINTROPUR SCIN

Fe-series

See a picture of the device's operating principle > Filtration of iron, manganese and humus

Fe series filters are based on natural filtering. The pollutants are deposited in a special mass of burnt natural stone. The amount of wash water required by WatMan filters is small.

Removal of iron and manganese

IX-series

See a picture of the device's operating principle > Ion exchange filter

The IX Series is based on ion exchange and can remove lime, iron, manganese, humus and uranium.

Damages caused by hardness can be permanently prevented by installing a IX water softening filter. The treated water is soft and will no longer clog water systems. In addition to hardness, the device can be used to remove dissolved iron and manganese. At the same time, the equipment can filter uranium out of water.

Removal of hardness, iron, manganese and humus

MLF-series

See a picture of the device's operating principle > Catalytic filtering

The MLF series devices can eliminate a wide range of impurities. Filter fillers are selected based on what impurities need to be removed at any given time.

The operation of the device consists of a series of consecutive filters and washings, which maintain the continuous functioning of the filler. The filter filler is changed if needed, usually every few years.

Removal of solids and miscellaneous impurities (FI)

RnAI-series

See a picture of the device's operating principle > Radon, hydrogen sulphide, carbon dioxide filtration

The RnAI series aeration devices are suitable for radon, hydrogen sulphide and carbon dioxide removal. Radon as a whole (including radon in the inside air) causes an estimated 200 lung cancer cases annually in Finland.

Radon can easily be removed as a gaseous substance through efficient aeration. Air with radon is vented in a controlled manner into the outdoor air through a blower. The radon aerator is installed immediately after the bore pump. The unit's own control centre monitors the entire water management system and makes it fully automated.

Radon and uranium removal

RnH- ja RnAH -series

See a picture of the device's operating principle> Activated carbon filtering

The RnH and RnAH series devices are another good option for removing radon. The RnAH model is equipped with an automated counter current wash. Activated carbon is particularly suitable for the removal of small or medium amounts of radon.

In automatic models, the RnAH mass can be flushed to remove contaminants such as rust. In models RnH this is not possible.

Radon and uranium removal

RO-series

See the certificate for the removal of blue-green algae (PDF: 81 kb)
See a picture of the device's operating principle > Reverse osmosis

Osmosis is a natural phenomenon. If two solutions ? a saline and non-saline - are separated from each other by a semi-permeable membrane, the saline solution will dilute until the salt content on both sides of the film is the same. A pressure differential is formed between the solutions, resulting in osmotic pressure. With regard to water purification, the phenomenon is backwards. If the saline solution is subjected to an external pressure greater than the natural osmotic pressure, the osmotic phenomenon may be reversed. The pressure and the semi-permeable membrane purify the water; in other words, reverse osmosis. The water drained through the membrane is purified water, the permeate. The dirty portion of the water that does not penetrate the film is discharged and drained. This portion takes with it over 90% of raw water contaminants.

The equipment can be installed in the household?s technical space or in a cabinet below a sink. The smallest equipment has a capacity of some tens of litres per day, which is sufficient for all food and drinking water. The smallest devices are equipped with their own faucet. Most of the equipment is typically equipped with a clean water storage tank and a separate pressure boost.

RO-series devices can be used to remove salt, chloride, arsenic, fluoride, uranium, including, for example, nitrates. In Finland, salt is especially abundant in coastal areas. Too much salt is harmful for one?s health and it will rust water systems and shorten their life.

The negative effects of both nitrate and fluoride are the most significant in children, although adults must also avoid these compounds.

www.vedensuodatin.fi Seawater Drinking Water, Bluewater Prowat

Seawater to drinking water video:

Drainage and Lake Water Drinking Water, Bluewater Spiritwat Merlin Reverse Osmosis System WatMan Reverse Osmosis

C-series

See a picture of the device's operating principle > Alkali filter

C Series Devices - as well as a series of FeAC and a number of MLF devices, are ideal for water alkalizing, i.e. raising the pH of the water. Water should be alkalized i.e. the pH of the water should be raised when copper or other metal tubes indicate signs of corrosion.

Investment, as well as operating costs, are minimal in terms of the benefits that can be achieved: we are talking about an investment of a few hundred euros, that amounts to only about 10 to 15 euros a year. Install the unit before the pressure tank.

Neutralization of acidic water

UV Disinfection

WatMan-Cintropur UV Disinfection WatMan-Sterilight UV Disinfection Lake Water Filter TRIO-UV

Single family homes Estimate Your Water Consumption (FI)

Water consumption in a single-family house is usually less than 20 l / min. Even the smallest WatMan filters have enough capacity to clean the water of one, or even two, households. Due to their small size, the equipment can also be installed in tight spaces.

Automation WatMan filters are automatic, making them easy to use. We also supply manually operated equipment.

Chemicals Fe series filters do not require chemicals. The IX series ion exchange filters are automatically revived with salt (NaCl).

Total filter costs WatMan filters are cost-effective. Due to the simplicity of the unit, the installation costs will typically be about a hundred euros; the device can often be installed the user. The machine does not need continuous maintenance, filter mass inspection and addition is easy.

Guarantees WatMan provides a quality guarantee for filtered water according to Regulations 401/2001 or 461/2001 of the Ministry of Social Affairs and Health. Additionally, the equipment comes with a 1 to 3 year mechanical warranty and, of course, a right of return under the Consumer Protection Act.

Delivery Standard equipment is delivered directly from your warehouse to your door or to your desired HVAC store. You can get the filters almost anywhere in Finland in just a few days. Our delivery always includes clear installation and operating instructions.

Other considerations WatMan filters can be installed in any space where they will not freeze and that is equipped with a drain. We always build equipment from components that have a good value for money or customize them from the very beginning.

Installation of activated carbon RnH series equipment should be carried out at least 3 to 5 meters from the living areas. Alternatively, the equipment should be installed close to the well or insulated with radiation protection.

IX HK and C Series Installation (FI) FeA-, MLFA Filter Installer

Pumppulohja Oy

Laatutie 4
09430 Saukkola

Company ID 08375464

Orders

Sales +358 20 741 7229
Switchboard +358 20 741 7220

Technical support

Finland only

(1,27€ / min)

Your shopping cart is empty

Terms and conditions

Ordering and delivery terms in our online store

Seller:

The vendor, and future supplier, will be Oy Pumppulohja Ab or Oy WatMan Ab Vedenkäsittely. Address Yrittäjäntie 4, 09430 Saukkola. Phone 020 741 7220 and email info@pumppulohja.fi

Pumppulohja WatMan is a reliable and robust partner. This is evidenced by the highest possible credit rating by D & N.

Price:

Prices are quoted for each product. Prices include the current VAT. The transportation is priced separately before payment is made. All online prices only apply to orders placed through our web site.

Liability for price errors: We reserve the right to alter prices or to change any erroneous prices. If the price of the product has risen after the order has been sent, we will sell the ordered items at the price at the time of ordering. However, we reserve the right to reject an order if there is an error that is independent of the supplier. We will then automatically refund your payment.

Delivery Method:

Products are delivered by mail or by a transport company selected by the customer. Products are also available at no additional cost at our factory as per a separately agreed schedule.

Delivery time: Delivery time of the products is either product-specific, either immediately in stock or 3-7 days, with a real delivery time of 3 to 10 day from the order date. We will communicate any the longer delivery times for specialty products.

The express delivery method, when delivery takes place within the day of the order or the next business day, can be selected separately.

Payment method:

When ordering as a private person the prices take into account the online store discount, which requires payment of products with an online payment using the banking service as it appears on the front page of the online store. Prices include VAT. We distribute the products to retailers according to the terms agreed upon.

Payment Service Provider

Paytrail Plc (2122839-7) is co-operating with Finnish banks and credit institutions as a provider of payment transfer services and as a payment service provider. Paytrail Plc will be credited to the payer by bank statement or card payment and it will forward payment to the merchant. Paytrail Plc has a payment institution license. In the case of complaints, we ask you to contact the vendor first.

Paytrail Oyj
Business ID: 2122839-7
Innova 2
Lutakonaukio 7
40100 Jyväskylä
Tel: 0207 181830

Online Banking

The payment transfer service associated with e-payment is implemented by Paytrail Oyj (2122839-7) in co-operation with Finnish banks and credit institutions. For the user, the service works just like a traditional online payment.

Shipping Fee:

Before confirming the order, delivery costs are itemized on a product-specific basis. The share of shipping costs for postal products ranges from EUR 5 and for freight transport from EUR 20. In the e-commerce order, the buyer is entitled to a discount on the online store even if he or she retrieves the products from the factory.

For express delivery, we will charge a separate express delivery fee of EUR 10 when the order value is less than EUR 200 or EUR 25 when the value of the order exceeds EUR 200. Express delivery fees are charged at 1« times rate.

Binding order:

A binding trade agreement will enter into force once a customer has submitted or paid for an order. We will confirm orders over 1000 euro separately by e-mail or telephone. We reserve the right to limit the sale of products in larger batches or specialty products, for example due to poor availability. The supplier's liability for poor availability of the product, authority or import restrictions is always limited to the cancellation of the order and the refund of any possible money that has been previously paid.

The consumer has the right to cancel the order at any point, even when the order has already been processed. See the restrictions below.

Suppliers reserve the right to cancel an order if the customer has not fulfilled his obligation to disclose information, see below. In this case, the supplier's liability is limited to cancelling the sale and possibly reimbursing the money paid in advance.

Obligations of the Customer:

Before ordering, the customer must consult the product's product descriptions on our website, the product itself at our factory or by discussing the order with our sales staff. In the case of a clear product defect, suppliers may rely on it being a mistake if there was such an obvious mistake that the customer should have understood the existence of the error. Suppliers reserve the right to cancel an order if the customer has not fulfilled his / her disclosure obligations.

In this case, the supplier's liability is limited to cancelling the sale and possibly reimbursing the money paid in advance.

We continuously develop our products. For this reason, the illustrated images may be indicative and may have deviations may occur in, for example, colour. Possible deviations of the image have no effect on the technical characteristics or operation of the product.

Reminders and Returns:

The consumer has the right to cancel the order even when the order has already been processed.

If the customer cancels the order only after the delivery of the products without unjustified reason - such as a product defect -, it is a case of unilateral cancellation of the order. In the case of unilateral cancellation, we will refund the amount of money already paid for the products. However, we will not reimburse the shipping costs already paid for and they remain the responsibility of the customer.

Reminders must be made within 7 days of receipt of the goods. According to the Consumer Protection Act, the right to cancel a subscription by mail order is 7 days after receiving the first item. The consumer must return the goods within 14 days of delivery, but not in the form of cash on delivery.

Returns due to wrong product information or due to product failure are free of charge by post. If the product is returned as a carrier service, the supplier's contract number must always be indicated. The purchase date is considered the day when the shipment has been received or picked up from the post.

The right to return to online store sales applies to unused and merchantable products. During retrieval, the consumer has the right to assess the product and try it in the same way as he could do when buying a product from the store. The consumer can open the box to examine and try out the goods without losing their right of return. However, he cannot install the product for use. After the product has been used, the product is not freely refundable, but the product is subject to our general warranty terms, below.

In exceptional cases, we can accept the return of a product that is not possible to resell, defective or outside the return period. However, we charge at least 30% of the price of the returned product.

Warranties:

All products have at least six months' warranty under the Consumer Protection Act. On a product-specific basis, our guarantee is typically 12 to 24 months. Under the Consumer Protection Act, a buyer must notify the guarantor of the error within a reasonable time when the buyer has detected a defect.

We always comply with Finnish law. We also comply with generally accepted contract and warranty terms in Finland, such as the general Nordic Delivery Terms NL 92 of the Finnish Metal Industries Federation. The full product warranty can be obtained from info@pumppulohja.fi or info@watman.fi on request.